Training can be delivered at any location

to suit the needs of a customer.

  It is usually more economical to bring the Instructor to the customers’ location than to bring everyone and everything to the instructor.

 

The training can also be delivered just about anywhere it is practical to travel to, set up a training room, and have a class. We will be as flexible as possible to our customer’s needs!

We offer innovative classes delivered by some of the most experienced instructors in the industry.

Airbus A330 (GE CF6) B1

Airbus A330 (GE CF6) B1


Description

This course prepares an airline Maintenance Engineer to operate, maintain, and repair all systems on the aircraft. This course provides in-depth technical information, including a detailed description of all systems and components, location and access of components, theory of operation, and overviews of maintenance procedures. In addition, relevant in-service problems and Airplane Maintenance Manual use are covered.

 

Objectives

This course satisfies ATA 104 Level III objectives. Upon completion of the course, the students
will be able to:

  • Recall the normal function of these airframe systems as applicable: electrical, fuel, auxiliary power unit, power plant, hydraulic power, landing gear, flight controls, pneumatic power, air conditioning, fire protection, oxygen, water and waste, equipment and furnishings, lights, doors and windows.

  • Recall the normal function of these avionics systems as applicable: indicating and recording, communications, navigation and auto flight.

  • Identify the interfaces between all airframe and avionics systems.

  • Recall the safety precautions to be observed when working on or near the aircraft.

Perform the following principal through maintenance activities on the airplane and Engine:

  • Routine servicing.

  • Operating systems.

  • Identifying normal and non-normal indications provided by aircraft controls, displays and built-in-test-equipment (BITE).

  • Identify power sources for all systems.

  • Recall the locations of the principal components and access to those components.

  • Use the Minimum Equipment List (MEL) to identify systems and components required for dispatch and any
    procedures to allow dispatch with systems/components inoperative.

  • Use aircraft troubleshooting tools to diagnose, correct and verify the repair of faults.

  • Analyze known in-service problems for the aircraft type.

  • Use family of ATA 100 reference manuals.


Duration

Approximately 35 training days

GE CF6 (A330) B1

Airbus A330 (GE CF6) B1


Description

This course prepares an airline Maintenance Engineer to operate, maintain, and repair all systems on the aircraft. This course provides in-depth technical information, including a detailed description of all systems and components, location and access of components, theory of operation, and overviews of maintenance procedures. In addition, relevant in-service problems and Airplane Maintenance Manual use are covered.

Objectives

This course satisfies ATA 104 Level III objectives. Upon completion of the course, the students will be able to:

  • Recall the normal function of these airframe systems as applicable: electrical, fuel, auxiliary power unit, power plant, hydraulic power, landing gear, flight controls, pneumatic power, air conditioning, fire protection, oxygen, water and waste, equipment and furnishings, lights, doors and windows.

  • Recall the normal function of these avionics systems as applicable: indicating and recording, communications, navigation and auto flight.

  • Identify the interfaces between all airframe and avionics systems.

  • Recall the safety precautions to be observed when working on or near the aircraft.

Perform the following principal through maintenance activities on the airplane and Engine:

  • Routine servicing.

  • Operating systems.

  • Identifying normal and non-normal indications provided by aircraft controls, displays and built-in-test-equipment (BITE).

  • Identify power sources for all systems.

  • Recall the locations of the principal components and access to those components.

  • Use the Minimum Equipment List (MEL) to identify systems and components required for dispatch and any
    procedures to allow dispatch with systems/components inoperative.

  • Use aircraft troubleshooting tools to diagnose, correct and verify the repair of faults.

  • Analyze known in-service problems for the aircraft type.

  • Use family of ATA 100 reference manuals.

Duration

Approximately 35 training days

Airbus A330 (RR Trent) B1

Course description is currently unavailable

Airbus A330 (PW4168) B1

Course description is currently unavailable

A330 (GE CF6, PW4168) B1

Differences to A330 (RR Trent) B1

A330 (PW4168, RR Trent) B1

Differences to A330 (GE CF6) B1

A330 (RR Trent, GE CF6) B1

Differences to A330 (PW4168) B1

A330 (GE CF6, RR Trent, PW4168) B1

Differences to A340 (CFM56) B1

A340 (CFM56) B1

Differences to A330 (GE CF6) B1

A340 (CFM56) B1

Differences to A330 (PW4168) B1

A340 (CFM56) B1

Differences to A330 (RR Trent) B1

Airbus A319/320/321 (V2500) B1

Course description is currently unavailable

Airbus A318/319/320/321 (CFM56) B1

Course description is currently unavailable

Airbus A319/320/321 (V2500) B1

Differences to A319/320/321 (CFM56) B1

Airbus A319/320/321 (CFM56) B1

Differences to A318 (CFM56) B1

Airbus A318 (CFM56) B1

Differences to A319/320/321 (CFM56) B1

Airbus A300-600 (GE CF6, PW4000) B1

Differences to A319/320/321 (V2500) B1

Airbus A310 (GE CF6, PW4000) B1

Course description is currently unavailable

Airbus A310 (GE CF6, PW4000) B1

Differences to A300-600 (GE CF6, PW4000) B1

A300-600 (GE CF6, PW4000) B1

Differences to Airbus A310 (GE CF6, PW4000) B1

RR Trent (A330) B1

Course description is currently unavailable

CFM56 (A340) B1

Course description is currently unavailable

Human Factors in Aircraft Maintenance

Course description is currently unavailable

CFM56 (A318/319/320/321) B1

Course description is currently unavailable

V2500 (A319/A320/A321) B1

Course description is currently unavailable

ETOPS

Maintenance Training

EASA

Module 5 Digital Techniques & EIS